Exhaust Manifold Lower Heat Shield Replacement

Exhaust Manifold Lower Heat Shield Replacement (LY7) (3.6L)

Removal Procedure




1. Remove the catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LY7) (Service and Repair)Catalytic Converter Replacement - Right Side (LZ4) (Service and Repair)Catalytic Converter Replacement - Right Side (LZ9 w/RPO M15) (Service and Repair)Catalytic Converter Replacement - Right Side (LZ9 w/RPO MT2) (Service and Repair).
2. Remove the exhaust manifold lower heat shield bolts (1, 2).
3. Remove the exhaust manifold lower heat shield.

Installation Procedure




1. Position the exhaust manifold lower heat shield to the engine.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the exhaust manifold lower heat shield bolts (1, 2).

* Tighten the bolt (1) to 10 Nm (89 lb in).
* Tighten the bolt (2) to 50 Nm (37 lb ft).

3. Install the catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LY7) (Service and Repair)Catalytic Converter Replacement - Right Side (LZ4) (Service and Repair)Catalytic Converter Replacement - Right Side (LZ9 w/RPO M15) (Service and Repair)Catalytic Converter Replacement - Right Side (LZ9 w/RPO MT2) (Service and Repair).