Fuel Tank Heat Shield Replacement

Fuel Tank Heat Shield Replacement

Removal Procedure

Danger: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.


Warning: Refer to Safety Glasses Warning (Safety Glasses Warning).

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




Warning: Refer to Exhaust Service Warning (Service Precautions).

2. Remove the fuel tank heat shield to fuel tank retaining nuts (1).
3. Remove the fuel tank heat shield (2).

Installation Procedure




1. Position the fuel tank heat shield (2) to the vehicle.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the fuel tank heat shield to fuel tank retaining nuts (1) and tighten to 4 Nm (35 lb in).
3. Lower the vehicle to the ground.