Coolant Heater Cord Replacement

Coolant Heater Cord Replacement (6.0L)

Removal Procedure

Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).

Danger: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.


Warning: Refer to Safety Glasses Warning (Safety Glasses Warning).

2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




3. Disconnect the coolant heater cord electrical connector (1).
4. Lower the vehicle.




5. Disengage the coolant heater cord to generator cable retaining clips (1).




6. Disengage the coolant heater cord to air cleaner assembly stud retaining clips (1).
7. Remove the coolant heater cord (2) from the vehicle.

Installation Procedure




1. Position the coolant heater cord (2) to the vehicle.
2. Engage the coolant heater cord to air cleaner assembly stud retaining clips (1).




3. Engage the coolant heater cord to generator cable retaining clips (1).
4. Raise the vehicle.




5. Connect the coolant heater cord electrical connector (1).
6. Lower the vehicle.
7. Connect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).