Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator Tube Replacement




1. Inspect the O-ring seal (1) for cuts or damage. If the O-ring seal (1) is not cut or damaged, it may be used again.
2. Lubricate the O-ring seal (1) with clean engine oil.
3. Install the O-ring seal (1) onto the oil level indicator tube (2).




4. Install the oil level indicator tube (2) to the engine and rotate into correct position.

Caution: Refer to Fastener Caution (Fastener Caution).

5. Install oil level indicator tube to cylinder head bracket retaining bolt (3) and tighten to 25 Nm (18 lb ft).
6. Install the oil level indicator (1) to the oil level indicator tube (2).