Evaporative Emission Hoses/Pipes Replacement - Canister/Fuel Tank

Evaporative Emission Hoses/Pipes Replacement - Canister/Fuel Tank

Removal Procedure
Caution: Refer to Fuel and EVAP Pipe Caution.

Notice: Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice.

1. Remove the fuel tank. Refer to Fuel Tank Replacement (Removal and Replacement).




2. Release the evaporative emission (EVAP) hose assembly retainers (1) from the fuel tank heat shield.

Important: Before disconnecting or reconnecting EVAP pipes. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service).





3. Cut and remove the ties (1) securing the EVAP hoses.
4. Disconnect the EVAP hose assembly (3) from the fuel tank vent valves and fuel module.
5. Remove the EVAP hose assembly from the fuel tank.
6. Remove the EVAP canister purge pipe (2) from the fuel tank.

Installation Procedure




1. Install the EVAP canister purge pipe (2) to the fuel tank.
2. Install the EVAP hose assembly to the fuel tank.
3. Connect the EVAP hose assembly (3) to the fuel tank vent valves and fuel module.
4. Install new ties (1) securing the EVAP hoses.




5. Attach the EVAP hose assembly retainers (1) to the fuel tank heat shield.
6. Install the fuel tank. Refer to Fuel Tank Replacement (Removal and Replacement).