Fuel Pump

2AZ-FE FUEL: FUEL PUMP: INSPECTION

1. INSPECT FUEL PUMP

(a) Check the fuel pump resistance.





(1) Using an ohmmeter, measure the resistance between terminals 1 and 2.

Standard resistance:

0.2 to 3.0 Ohms at 20°C (68°F)

(2) If the result is not as specified, replace the fuel pump.

(b) Check fuel pump operation.

(1) Apply battery voltage to terminals 1 and 2. Check that the pump operates.

NOTICE:

* These tests must be completed within 10 seconds to prevent the coil from burning out.

* Keep the fuel pump as far away from the battery as possible.

* Always turn on and off the voltage on the battery side, not the fuel pump side.

(2) If the pump does not operate, replace the fuel pump.