Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. ADJUST SPIRAL CABLE Installation

2. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft.

(b) Install the steering wheel assembly set nut.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

(c) Connect the connectors to the spiral cable sub-assembly.

3. INSTALL STEERING PAD Installation

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

5. INSTALL LOWER NO. 2 STEERING WHEEL COVER (W/ Cruise Control System) Installation

6. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

7. INSPECT STEERING WHEEL CENTER POINT

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSPECT SRS WARNING LIGHT

Diagnosis System