Air Bag Warning Lamp Does Not Come ON
AIR BAG Warning Lamp Does Not Come ONWiring Diagram:
Wiring Diagram
CAUTION:
- Be sure to perform Air Bag Diagnostic System Check:Advanced Air Bag before starting diagnosis according to flow. Air Bag Diagnostic System Check
- When measurement of resistance or voltage is required in this flow, use a tester along with a correct terminal adapter from special tool (Connector test adapter kit).
- When a check for proper connection is required, refer to Inspection of Intermittent and Poor Connections:Advanced Air Bag. Inspection of Intermittent and Poor Connections
- If there is open circuit in the air bag wire harness, connector or terminal is found damaged, replace the wire harness, connector and terminal as an assembly.
Step 1 - 2:
Flow Test Description
Step 1: Check combination meter power feed circuit.
Step 2: Check AIR BAG warning lamp circuit.