P0335

DTC P0335

DTC Detecting Condition and Trouble Area






Circuit Diagram

Circuit Diagram:

System Description
The CKP sensor located on the cylinder block consists of the signal generator (magnetic sensor) and sensor plate (fixed to crankshaft).
The signal generator generates reference signal through slits in the sensor plate which turns together with the crankshaft.

Reference signal
The CKP sensor generates 30 pulses of signals each of which has a different waveform length while the crankshaft makes one full rotation.
Based on CMP sensor signal and CKP sensor signal, ECM judges which cylinder piston is in the compression stroke.
Also, ECM judge engine speed based on CKP sensor signal.

DTC Confirmation Procedure

NOTE:
- Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
- Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- Battery voltage >= 10 V
- DTC P0616 or P0617 is not detected.

1. Crank engine for 5 sec.

DTC Troubleshooting

Step 1-3:

Step 4-5: