P0441

DTC P0441

DTC Detecting Condition and Trouble Area
For details of EVAP leak check system, refer to EVAP Leak Check System Description.






Circuit Diagram

Circuit Diagram:

DTC Confirmation Procedure

WARNING:
- Perform road test in a place where there is no traffic to prevent an accident.
- Road test should be performed by two persons, a driver and a tester, on a level road.

NOTE:
- Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
- Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- 11 V <= Battery voltage
- DTC P0443, P0449, P2228 or P2229 is not detected.

1. Warm up engine to normal operating temperature.
2. Drive vehicle at 50 - 100 km/h (30 - 60 mile/h) for 10 min.

DTC Troubleshooting

Step 1-5: