P0443

DTC P0443

DTC Detecting Condition and Trouble Area






Circuit Diagram

Circuit Diagram:

DTC Confirmation Procedure

WARNING:
- Perform road test in a place where there is no traffic to prevent an accident.
- Road test should be performed by two persons, a driver and a tester, on a level road.

1. Warm up engine to normal operating temperature.
2. Drive vehicle at 30 - 50 km/h (19 - 31 mile/h) for 5 min. at 5th gear or D range. (Keep throttle valve opening constantly in this step.)

DTC Troubleshooting

Step 1-4: