P0713
DTC P0713DTC Detecting Condition and Trouble Area
Circuit Diagram
DTC Confirmation Procedure
WARNING:
^ Perform road test in a place where there is no traffic to prevent an accident.
^ Road test should be performed by two persons, a driver and a tester, on a level road.
NOTE:
^ Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
^ Confirm that the following conditions are met in this procedure.
- Battery voltage > 10.5 V
1) Warm up engine to normal operating temperature.
2) Drive vehicle at more than 20 km/h (12 mile/h) for 20 sec.
DTC Troubleshooting
