P0963
DTC P0962 / P0963DTC Detecting Condition and Trouble Area
Circuit Diagram
DTC Confirmation Procedure
P0962
NOTE:
Confirm that the following conditions are met in this procedure.
^ Battery voltage > 10.5 V
1) Push engine switch to change ignition mode to "ON", and leave ignition mode in "ON" for 10 sec.
P0963
NOTE:
^ Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
^ Confirm that the following conditions are met in this procedure.
- Battery voltage > 10.5 V
1) Push engine switch to change ignition mode to "ON", and leave ignition mode in "ON" for 10 sec.
DTC Troubleshooting
