P2196

DTC P2195/P2196

DTC Detecting Condition and Trouble Area






Circuit Diagram

Circuit Diagram:

DTC Confirmation Procedure

WARNING:
- Perform road test in a place where there is no traffic to prevent an accident.
- Road test should be performed by two persons, a driver and a tester, on a level road.

NOTE:
- Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
- Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- DTC P0131, P0132, P0137, P0138 or P2237 is not detected.

1. Warm up engine to normal operating temperature.
2. Drive vehicle at 50 - 60 km/h (31 - 37 mile/h) (engine speed: 1,500 - 3,000 rpm) for 3 min. (Keep throttle valve opening constantly in this step.)

DTC Troubleshooting

Step 1-4: