P1825

DTC P1825

DTC Detecting Condition and Trouble Area






DTC Confirmation Procedure

1) Push engine switch to change ignition mode to "ON".
2) Push engine switch to change ignition mode to "OFF", and leave ignition mode in "OFF" for 10 sec.
3) Repeat Step 1).

DTC Troubleshooting

1.
Was "CVT System Check" performed?
YES -
Go to Step 2.
NO -
Go to CVT System Check CVT System Check.

2. DTC check

Check DTC.

Is there DTC other than P1825?
YES -
Go to troubleshooting for applicable DTC.
NO -
Go to Step 3.

3. DTC recheck

Perform Programming and Relearning TCM Initialization and Learning Control.
Clear DTC. DTC Clearance
Confirm that ignition mode of keyless push start system is in "OFF".
Perform DTC confirmation procedure and check DTC.

Is DTC P1825 still detected?
YES -
Substitute a known-good ROM (valve body assembly) and recheck DTC.
NO -
End.