Clearing Trouble Codes

In case of not using TOYOTA hand-held tester:
Clear the DTC.
(1) Using SST, connect terminals Tc and E1 of DLC1.
SST 09843-18020
(2) Turn the ignition switch ON.
(3) Clear the DTC stored in ECU by depressing the brake pedal 8 times or more within 5 seconds.
(4) Check that the warning light shows the normal code.
(5) Remove the SST from the terminals of DLC1.
SST 09843-18020

HINT: Cancellation cannot be done by removing the battery cable or ECU-IG fuse.




In case of using TOYOTA hand-held tester:
Clear the DTC.
(1) Hook up the TOYOTA hand- held tester to the DLC3.
(2) Turn the ignition switch ON.
(3) Operate the TOYOTA hand-held tester to erase the codes.

HINT: Please refer to the TOYOTA hand-held tester operator's manual for further details.