Removal

2GR-FE ENGINE CONTROL SYSTEM: THROTTLE BODY:

REMOVAL

1. REMOVE ENGINE UNDER COVER LH
2. REMOVE ENGINE UNDER COVER RH
3. DRAIN ENGINE COOLANT (Testing and Inspection)

4. REMOVE COOL AIR INTAKE DUCT SEAL (Removal)

5. REMOVE V-BANK COVER SUB-ASSEMBLY (Removal)

6. REMOVE AIR CLEANER INLET ASSEMBLY (Removal)

7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

(a) Disconnect the 3 vacuum hoses.

(b) Disconnect the mass air flow meter connector (*1).
(c) Disconnect the No. 2 ventilation hose (*2).
(d) Disconnect the hose band (*3).

(e) Disconnect the 3 bands, and remove the air cleaner cap sub-assembly.
8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (Removal)

9. REMOVE NO. 1 AIR CLEANER INLET (Removal)

10. REMOVE THROTTLE BODY

(a) Disconnect the throttle body connector and clamp.

(b) Disconnect the 2 water by-pass hoses from the throttle body.