C1300

BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C1300: Skid Control ECU Malfunction

DTC C1300 - Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the computer by self-diagnosis.





INSPECTION PROCEDURE

NOTE: When replacing the skid control ECU, perform initialization of linear solenoid valve and calibration.

PROCEDURE

1. CHECK DTC
(a) Clear the DTCs.
(b) Turn the power switch ON (READY).
(c) Check the same DTCs are recorded.

Result





B -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEMS TABLE
A -- REPLACE SKID CONTROL ECU