DTC 5C-40

NAVIGATION SYSTEM: 5C-40: Camera Picture Error

DTC 5C-40 - Camera Picture Error

DESCRIPTION





WIRING DIAGRAM





INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK WIRE HARNESS (MULTI-DISPLAY - TELEVISION CAMERA)





(a) Disconnect the M14 display connector.
(b) Disconnect the T13 camera connector.
(c) Measure the resistance of the wire harness side connectors.
Standard resistance:





NG -- REPAIR OR REPLACE HARNESS AND CONNECTOR
OK -- Continue to next step.
2. CHECK MULTI-DISPLAY (CA+ VOLTAGE)





(a) Measure the voltage of the display.
Standard voltage:





NG -- REPLACE MULTI-DISPLAY
OK -- REPLACE TELEVISION CAMERA ASSEMBLY