Removal

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY (for Convertible):

REMOVAL

HINT:
- The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart (Standard Bolt - Specified Torque For Standard Bolts).
- CRS stands for child restraint seat.

1. REMOVE REAR SEAT CUSHION ASSEMBLY (Removal)

2. REMOVE REAR SEAT HEADREST PLATE COVER RH (Removal)

3. REMOVE REAR SEAT HEADREST PLATE COVER LH (Removal)

4. REMOVE REAR SEAT HEADREST PLATE RH (Removal)

5. REMOVE REAR SEAT HEADREST PLATE LH (Removal)

6. REMOVE REAR SEAT HEADREST ASSEMBLY RH
7. REMOVE REAR SEAT HEADREST ASSEMBLY LH
8. REMOVE REAR SEAT SHOULDER BELT COVER LH (Removal)

9. REMOVE REAR SEAT SHOULDER BELT COVER RH (Removal)

10. REMOVE REAR SEATBACK ASSEMBLY (Removal)

11. REMOVE FRONT DOOR SCUFF PLATE LH (Removal)

12. REMOVE CUP HOLDER NO.1
13. REMOVE QUARTER TRIM PANEL SUB-ASSEMBLY UPPER LH (Removal)

14. REMOVE QUARTER TRIM PANEL LOWER LH (Removal)

15. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH





(a) Remove the 3 bolts and belt.
16. REMOVE CRS ANCHOR BRACKET
(a) Remove the 2 nuts and bracket.