Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna):

REMOVAL

1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

2. REMOVE FRONT DOOR SCUFF PLATE LH (for Coupe) (Removal)

3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Coupe) (Removal)

4. REMOVE REAR SEATBACK ASSEMBLY (for Convertible)

HINT: Refer to the procedures up to "REMOVE REAR SEATBACK ASSEMBLY" (Removal).

5. REMOVE REAR SEATBACK ASSEMBLY (for Coupe) (Removal)

6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH (for Coupe)
7. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH (for Coupe) (Removal)

8. REMOVE CENTER PILLAR GARNISH LH (for Coupe) (Removal)

9. REMOVE NO. 1 CUP HOLDER (for Convertible)
10. REMOVE UPPER QUARTER TRIM PANEL LH (for Convertible) (Removal)

11. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH (for Coupe) (Removal)

12. REMOVE UPPER QUARTER TRIM PANEL LH (for Coupe)





(a) Remove the upper quarter trim panel LH.
13. REMOVE TIRE PRESSURE WARNING RECEIVER (for Coupe)





(a) Disconnect the connector.
(b) Remove the bolt and tire pressure warning receiver from the body.
14. REMOVE TIRE PRESSURE WARNING RECEIVER (for Convertible)
(a) Disconnect the connector.





(b) Remove the nut and tire pressure warning receiver from the body.