Installation

METER: COMBINATION METER (for Hatchback):

INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY





(a) Install the combination meter assembly with the 2 screws.
(b) Connect the 2 connectors.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL





(a) Fit the 3 A claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.






(b) Engage the 4 claws and 5 clips and install the instrument cluster finish panel.
3. INSTALL INSTRUMENT PANEL FINISH PANEL END RH






(a) Connect the connector.
(b) Engage the 5 claws and 3 clips and install the instrument panel finish panel end RH.
4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH






(a) Connect the connector.
(b) Engage the 5 claws and 3 clips and install the instrument panel finish panel end LH.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)