DTC 62-46

NAVIGATION: NAVIGATION SYSTEM: 63-46: Scratched / Reversed Disc

DTC 63-46 - Scratched / Reversed Disc

DTC 62-46 - Scratched / Reversed Disc

DESCRIPTION





INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK DISC
(a) Check that the CD is not inserted upside down.
OK:
CD or DVD is properly inserted.

NG -- INSERT DISC
OK -- Continue to next step.

2. CHECK DISC





(a) Check that the disc is not deformed or cracked.
OK:
No deformations or cracks on the disc.

NG -- CHANGE DISC
OK -- Continue to next step.

3. CLEAN DISC





(a) Disc cleaning
(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTE: Do not use a conventional record cleaner or anti-static preservative.

NEXT -- Continue to next step.

4. CLEAR DTC
(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
NEXT -- Continue to next step.

5. RECHECK DTC
(a) Recheck for DTCs and check if the same trouble occurs again.
OK:
Malfunction disappears.
OK -- END

NG -- Continue to next step.

6. REPLACE DISC
(a) Replace the disc with another and recheck.
(1) Replace the disc with another normal one.
(2) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
(3) Recheck for DTCs and check if the same trouble occurs again.
OK:
Malfunction disappears.

NG -- REPLACE RADIO RECEIVER
OK -- END