P1572

CRUISE CONTROL: DYNAMIC LASER CRUISE CONTROL SYSTEM: P1572: Improper Aiming of Radar Sensor Beam Axis

DTC P1572 - Improper Aiming of Radar Sensor Beam Axis

DESCRIPTION

This DTC is output when the scanning angle of the laser sensor is incorrect.
This DTC is also output when the laser sensor optical axis is in an incorrect position is detected.





HINT: If the optical axis deviates to the upper/lower side +/- 2° or more and/or the right/left side +/- 4° or more, this DTC is detected.

INSPECTION PROCEDURE

PROCEDURE

1. ADJUST LASER SENSOR

HINT: Adjustments

NEXT -- END