Display Check Mode

NAVIGATION: NAVIGATION SYSTEM: DISPLAY CHECK MODE

DISPLAY CHECK MODE

HINT:
- This mode checks the color display on the multi-display.
- Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

1. Enter diagnostic mode Reading and Clearing Diagnostic Trouble Codes.
2. Read the display check result.









(a) Display Check Mode





HINT: In Display Check Mode, above checks can be performed.









(b) Display Color Bar Check
(1) Start Diagnosis System.
(2) Select "MENU".
(3) Select "Display Check".
(4) Select "Color Bar Check".
(5) Make sure that each color name is corresponding to each color on the bar.

HINT: Select Black, Red, Green, Blue, White and Stripe to display selected colors and stripe on the entire screen.

(6) Compare with the Color Bar Check in the Navigation Check and make sure that no difference is found.









(c) Remote Commander Check
(1) Start the Diagnosis System.
(2) Select "MENU".
(3) Select "Display Check".
(4) Select "Remote Commander Check".
(5) Press each switch and make sure that it corresponds to the display on the screen.









(d) Display Vehicle Signal Check
(1) Start the Diagnosis System.
(2) Select "MENU".
(3) Select "Display Check".
(4) Select "Vehicle Signal Check".
(5) Check the status of the vehicle signal loaded into the display.

HINT: Vehicle signal data is updated every second.