Navigation Check Mode

NAVIGATION: NAVIGATION SYSTEM: NAVIGATION CHECK MODE

NAVIGATION CHECK MODE

HINT:
- This mode displays product information on the navigation systems and discs.
- Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

1. Enter diagnostic mode Reading and Clearing Diagnostic Trouble Codes.
2. Read the navigation check result.









(a) Navigation Check Mode





HINT:
- In the Navigation Check mode, the checks mentioned above can be conducted.
- The Navigation ECU operates each Navigation Check screen.









(b) GPS Information
(1) Start Diagnosis System.
(2) Select "MENU".
(3) Select "Navigation Check".
(4) Select "GPS Information".
(5) Check the GPS-related information.

















(c) Vehicle Sensors
(1) Start Diagnosis System.
(2) Select "MENU".
(3) Select "Navigation Check".
(4) Select "Vehicle Sensors".
(5) Check the vehicle signals (ACC, REV, SPD) and the output signal of the gyro sensor introduced into the navigation ECU.









(d) Navigation Color Bar Check
(1) Start Diagnosis System.
(2) Select "MENU".
(3) Select "Navigation Check".
(4) Select "Color Bar Check".
(5) Make sure that the set color matches the display color.
(6) Compare with the Color Bar Check in the Display Check and make sure that no difference is found.









(e) Parts Information
(1) Start Diagnosis System.
(2) Select "MENU".
(3) Select "Navigation Check".
(4) Select "Parts Information".
(5) Check the program and disc version.









(f) Memory Copy/Paste

HINT: This function is not available.