CD cannot be Inserted / Played or CD is Ejected Right After Insertion

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: CD cannot be Inserted / Played or CD is Ejected Right After Insertion

CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF A PROPER CD IS INSERTED
(a) Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or has any other defects.
OK:
Normal audio CD.

HINT:
- Translucent or uniquely-shaped CDs cannot be played.
- CDs for personal computers (with music recorded in) and CD-Rs cannot be played.

NG -- CD IS FAULTY
OK -- Continue to next step.

2. CHECK THAT CD IS INSERTED PROPERLY
(a) Check whether or not the CD is inserted upside down.
OK:
CD is properly inserted.

NG -- SET CD PROPERLY
OK -- Continue to next step.

3. CHECK CD





(a) Clean the disc by wiping it with a soft cloth from inside to outside in a radial direction.
OK:
Malfunction disappears.

NOTE: Do not use a conventional record cleaner or anti-static preservative.

NG -- REPLACE CD
OK -- CD WAS DIRTY
4. REPLACE CD
(a) Replace the CD with a normal one and check that the malfunction disappears.
OK:
Malfunction disappears.

NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- CD IS FAULTY