Installation

EXTERIOR: REAR BUMPER: INSTALLATION

INSTALLATION

1. INSTALL REAR BUMPER ARM MOUNTING BRACKET LH





(a) Install the rear bumper arm mounting bracket LH with the 3 nuts.
Torque: 55 Nm (560 kgf-cm, 41 ft-lbf)
2. INSTALL REAR BUMPER ARM MOUNTING BRACKET RH

HINT: Use the same procedure for the RH side and LH side.

3. INSTALL NO. 1 REAR BUMPER REINFORCEMENT





(a) Install the No. 1 rear bumper reinforcement with the 6 nuts.
Torque: 55 Nm (560 kgf-cm, 41 ft-lbf)
4. INSTALL REAR BUMPER ENERGY ABSORBER





(a) Engage the 12 claws and install the rear bumper energy absorber.
5. INSTALL REAR BUMPER SIDE SUPPORT LH





(a) Engage the claw and install the rear bumper side support LH.
(b) Install the screw.
6. INSTALL REAR BUMPER SIDE SUPPORT RH

HINT: Use the same procedure for the RH side and LH side.

7. INSTALL REAR BUMPER SIDE RETAINER LH





(a) Engage the 2 claws and install the rear bumper side retainer LH.
(b) Install the 3 screws.
8. INSTALL REAR BUMPER SIDE RETAINER RH

HINT: Use the same procedure for the RH side and LH side.

9. INSTALL REAR BUMPER ASSEMBLY
(a) Install 2 new gaskets on the rear bumper assembly.





(b) Install the rear bumper assembly with the 2 nuts, 4 screws and 2 clips.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)