Horn Circuit

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: Horn Circuit

Horn Circuit

DESCRIPTION

The multiplex network body ECU activates the horn when a panic signal is detected from the door control transmitter.

HINT: The horn for the panic alarm function can be set to OFF.

WIRING DIAGRAM





INSPECTION PROCEDURE

HINT: The horn circuit uses BEAN for communication. If there are any malfunctions in this circuit, check for DTCs in the multiplex communication system Initial Inspection and Diagnostic Overview.

PROCEDURE

1. CHECK STEERING PAD
(a) When pushing the steering pad switch, check that the vehicle horn sounds normally.
OK:
The horn sounds normally.

NG -- GO TO HORN SYSTEM
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE