Removal

AIR CONDITIONING: BLOWER UNIT: REMOVAL

REMOVAL

HINT:
- Installation is in the reverse order of removal.
- COMPONENTS for instrument panel safety pad sub-assembly: Components.

1. DISCONNECT BATTERY NEGATIVE TERMINAL
(a) Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
2. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH Removal
3. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH Removal
4. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
5. REMOVE WINDSHIELD WIPER MOTOR AND LINK Removal
6. REMOVE COWL VENTILATOR PANEL SUB-ASSEMBLY

HINT: Removal

7. DISCHARGE FROM REFRIGERATION SYSTEM Service and Repair
8. DISCONNECT SUCTION HOSE SUB-ASSEMBLY Removal
9. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY Removal
10. DISCONNECT HEATER WATER OUTLET HOSE A Removal
11. DISCONNECT HEATER WATER INLET HOSE A Removal
12. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Removal
13. REMOVE AIR DUCT SUB-ASSEMBLY NO.1 Removal
14. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY Removal
15. REMOVE STEERING COLUMN ASSEMBLY Removal
16. REMOVE HEATER TO REGISTER DUCT NO.2 Removal
17. REMOVE HEATER TO REGISTER DUCT ASSEMBLY NO.6 Removal
18. REMOVE CONSOLE BOX DUCT NO.1 Removal
19. REMOVE FLOOR CARPET BRACKET LH Removal
20. REMOVE FLOOR CARPET BRACKET RH Removal
21. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY Removal
22. REMOVE AIR DUCT SUB-ASSEMBLY NO.2 Disassembly
23. REMOVE BLOWER ASSEMBLY





(a) Remove the connector and clamp, and disconnect the wire harness.





(b) Remove the 6 screws and then the blower assembly with the cooler evaporator sub-assembly.