Removal

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: REMOVAL

REMOVAL

1. PRECAUTION

CAUTION: Be sure to read the "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE FRONT DOOR SCUFF PLATE LH Removal
4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal
5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
6. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH Removal
7. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY





(a) Remove the 4 bolts and the driver side knee airbag assembly.
(b) Disconnect the connector from the driver side knee airbag assembly.

NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

8. INSPECT DRIVER SIDE KNEE AIRBAG ASSEMBLY