Removal

SUSPENSION: FRONT LOWER BALL JOINT: REMOVAL

REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL
2. REMOVE FRONT AXLE SHAFT LH NUT
(a) Remove the front axle hub LH nut Removal.
SST: 09930-00010
3. SEPARATE SPEED SENSOR FRONT LH
(a) Separate the speed sensor front LH Removal.
4. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY LH
(a) Separate the front disc the brake caliper assembly LH Removal.
5. REMOVE DISC WHEEL
6. SEPARATE TIE ROD ASSEMBLY LH
(a) Separate the tie rod assembly LH Removal.
SST: 09628-62011
7. SEPARATE FRONT LOWER SUSPENSION ARM
(a) Separate the front lower suspension arm Removal.
8. REMOVE FRONT AXLE ASSEMBLY LH
(a) Remove the front axle assembly LH Removal.
9. REMOVE LOWER BALL JOINT ASSEMBLY FRONT LH





(a) Remove the cotter pin and castle nut.
(b) Using SST, remove the lower ball joint assembly front LH.
SST: 09628-62011