Removal

EXTERIOR: REAR BUMPER: REMOVAL

REMOVAL

1. REMOVE REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler)





(a) Put protective tape around the rear bumper assembly.





(b) Using a screwdriver, open the 2 rear bumper plates.
HINT: Tape the screwdriver tip before use.





(c) Remove the 6 screws and 2 clips.





(d) Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration.
HINT: Use the same procedures for the RH side and LH side.

(e) Remove the rear bumper assembly.
2. REMOVE REAR FLOOR BOARD (w/ Rear Lower Spoiler)





(a) Remove the 4 screws, 2 clips, 3 nuts and rear floor board.
3. REMOVE REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler)





(a) Put protective tape around the rear bumper assembly.





(b) Using a screwdriver, open the 2 rear bumper plates.
HINT: Tape the screwdriver tip before use.





(c) Remove the 6 screws.





(d) Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration.
HINT: Use the same procedures for the RH side and LH side.

(e) Remove the rear bumper assembly.