Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SPIRAL CABLE: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE NO. 3 LOWER STEERING WHEEL COVER Removal
4. REMOVE NO. 2 LOWER STEERING WHEEL COVER Removal
5. REMOVE STEERING PAD Removal
6. REMOVE STEERING WHEEL ASSEMBLY Removal
7. REMOVE STEERING COLUMN COVER Removal
8. REMOVE SPIRAL CABLE (w/o VSC)





(a) Disconnect the connectors from the spiral cable.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Disengage the 3 claws and remove the spiral cable.
9. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR (w/ VSC)





(a) Disconnect the connectors from the spiral cable with steering angle sensor.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Disengage the 3 claws and remove the spiral cable with steering angle sensor.
10. REMOVE SPIRAL CABLE (w/ VSC)





(a) Disengage the 6 claws and remove the spiral cable from the steering angle sensor.