Removal

2AZ-FE STARTING: STARTER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE AIR CLEANER INLET ASSEMBLY Removal
3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal
5. REMOVE STARTER ASSEMBLY (for Manual Transaxle)





(a) Disconnect the terminal 50 connector from the starter assembly.
(b) Remove the nut and disconnect the wire harness from terminal 30.





(c) Remove the 3 bolts, clutch flexible hose bracket and starter assembly.
6. REMOVE STARTER ASSEMBLY (for Automatic Transaxle)





(a) Disconnect the terminal 50 connector from the starter assembly.
(b) Remove the nut and disconnect the wire harness from terminal 30.





(c) Remove the 2 bolts and starter assembly.