Installation

CLUTCH: CLUTCH RELEASE CYLINDER: INSTALLATION

INSTALLATION

1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY





(a) Install the clutch release cylinder and clutch line bracket with the 2 bolts.
Torque: 12 Nm (120 kgf-cm, 9ft-lbf)
2. INSTALL CLUTCH ACCUMULATOR ASSEMBLY Installation
3. CONNECT CLUTCH LINE Installation
4. INSTALL RELEASE CYLINDER HEAT INSULATOR Installation
5. INSTALL CLUTCH ACCUMULATOR BRACKET Installation
6. BLEED CLUTCH LINE
(a) Fill the brake reservoir with brake fluid and bleed the clutch system.
Torque: 8.3 Nm (85 kgf-cm, 74in-lbf)
7. CHECK FOR BRAKE FLUID LEAKAGE
HINT: Check for leakage in the clutch system.

8. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation
9. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation
10. INSTALL AIR CLEANER INLET ASSEMBLY Installation
11. CHECK FLUID LEVEL IN RESERVOIR
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL