Removal

E351 MANUAL TRANSAXLE: DIFFERENTIAL OIL SEAL: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side (transaxle case oil seal) and LH side (transaxle case cover oil seal).
- The procedures listed below are for the LH side (transaxle case cover oil seal).

1. DRAIN MANUAL TRANSAXLE OIL
(a) Remove the filler plug and the gasket.
(b) Remove the drain plug and gasket, and drain the manual transaxle oil.
(c) Install a new gasket and the drain plug.
Torque: 49 Nm (500 kgf-cm, 36ft-lbf)
2. REMOVE FRONT WHEELS
3. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
TMC made: Removal.
TMMK made: Removal.
4. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

5. REMOVE FRONT TRANSAXLE CASE COVER OIL SEAL





(a) Using SST, remove the oil seal.
SST: 09308-00010
6. REMOVE TRANSAXLE CASE OIL SEAL





(a) Using SST, remove the oil seal.
SST: 09308-00010