Installation

ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Pass the hood lock control cable assembly into the engine compartment.









(b) Pass the cable through the upper radiator support.
(c) Connect the clamps as shown in the illustration.
2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY





(a) Install the hood lock control lever and connect the hood lock control cable.
3. INSTALL HOOD LOCK ASSEMBLY





(a) Apply MP grease to the sliding areas of the lock.





(b) Connect the hood lock control cable.





(c) Install the hood lock assembly with the 3 bolts.
Torque: 7.5 Nm (77 kgf-cm, 66in-lbf)
4. INSTALL HIGH PITCHED HORN ASSEMBLY Installation
5. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY





(a) Install the front fender splash shield sub-assembly with the grommet and 4 screws.
(b) Install the bolt and 5 clips.
6. INSPECT HOOD SUB-ASSEMBLY Testing and Inspection
7. ADJUST HOOD SUB-ASSEMBLY Adjustments
8. INSTALL FRONT BUMPER ASSEMBLY Installation
9. INSTALL FRONT WHEEL OPENING EXTENSION PAD





(a) Install the front wheel opening extension pad with the 3 screws.
10. INSTALL FRONT WHEEL Installation