Removal

ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL
2. REMOVE FRONT WHEEL OPENING EXTENSION PAD





(a) Remove the 3 screws and the front wheel opening extension pad.
3. REMOVE FRONT BUMPER ASSEMBLY Removal
4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY





(a) Remove the 5 clips and bolt.
(b) Remove the 4 screws, grommet, and the front fender splash shield sub-assembly.
5. REMOVE HIGH PITCHED HORN ASSEMBLY Removal
6. REMOVE HOOD LOCK ASSEMBLY





(a) Remove the 3 bolts.





(b) Disconnect the hood lock control cable.
(c) Remove the hood lock assembly.
7. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY





(a) Disconnect the hood lock control cable and remove the hood lock control lever.
8. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Using a screwdriver, disconnect the clamps shown in the illustration.









HINT: Tape the screwdriver tip before use.

(b) Pull the cable from the engine compartment and remove it.