Disassembly

SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY

DISASSEMBLY
NOTICE: Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

1. REMOVE RECLINING ADJUSTER RELEASE HANDLE





(a) Lift the reclining adjuster release handle.
(b) Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.
HINT: Tape the screwdriver tip before use.

2. REMOVE FRONT SEAT CUSHION SHIELD





(a) Disengage the 2 hooks.





(b) Remove the 2 screws.
(c) Disengage the 2 claws and remove the front seat cushion shield.
3. REMOVE LOWER SEAT TRACK SPACER





(a) Remove the 2 screws and lower seat track spacer.
4. REMOVE FRONT SEAT INNER BELT ASSEMBLY Removal
5. REMOVE FRONT INNER SEAT CUSHION SHIELD





(a) Remove the screw.
(b) Disengage the claw and clip, and then remove the front inner seat cushion shield.
6. REMOVE FRONT SEAT CUSHION COVER WITH PAD





(a) Disengage the clamp.
(b) Disengage the hooks and remove the front seat cushion cover with pad.
7. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER





(a) Remove the 16 hog rings and separate type front seat cushion cover.
8. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY





(a) Remove the 2 screws.
(b) Disconnect the 14 clamps and front separate type seatback cover.
(c) Pull the seatback board in the direction indicated by the arrow in the illustration to detach the 2 claws. Then, remove the front seatback board sub-assembly.
9. REMOVE FRONT SEAT HEADREST SUPPORT





(a) Detach the 2 claws and remove the headrest support.
10. REMOVE FRONT SEAT HEADREST SUPPORT
11. REMOVE FRONT SEATBACK COVER WITH PAD





(a) Disengage the 3 hooks.





(b) Remove the 2 hog rings.





(c) Remove the nut and separate the 2 brackets.
(d) Remove the front seatback cover with pad.
12. REMOVE SEPARATE TYPE FRONT SEATBACK COVER





(a) Remove the 10 hog rings and front separate type seatback cover.
13. REMOVE RECLINING ADJUSTER INSIDE COVER LH





(a) Remove the screw.
(b) Disengage the claw and remove the reclining adjuster inside cover LH.
14. REMOVE RECLINING ADJUSTER INSIDE COVER RH





(a) Disconnect the clamp.
(b) Remove the screw.
(c) Disengage the claw and remove the reclining adjuster inside cover RH.
15. REMOVE RECLINING ADJUSTER INSIDE COVER LH





(a) Remove the screw and reclining adjuster inside cover LH.
16. REMOVE RECLINING ADJUSTER INSIDE COVER RH
HINT: Use the same procedures for the RH side and LH side.

17. REMOVE OCCUPANT DETECTION ECU Removal