Installation

SEAT: REAR SEAT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL REAR SIDE SEATBACK ASSEMBLY LH





(a) Install the rear side seatback assembly with the bolt.
Torque: 18 Nm (184 kgf-cm, 13ft-lbf)
2. INSTALL REAR SIDE SEATBACK ASSEMBLY RH
3. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY LH





(a) Install the separate type rear seatback assembly with the 2 bolts.
Torque: 18 Nm (184 kgf-cm, 13ft-lbf)
4. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH





(a) Install the separate type rear seatback assembly with the 2 bolts.
Torque: 18 Nm (184 kgf-cm, 13ft-lbf)
5. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
6. INSTALL REAR SEAT HEADREST ASSEMBLY
7. INSTALL REAR SEAT CUSHION ASSEMBLY





(a) Attach the front hooks of the bench type rear seat cushion assembly to the vehicle body.
(b) Confirm that the seat cushion is firmly installed.
NOTICE: When installing the bench type rear seat cushion assembly, make sure that the seat belt buckle is not under the bench type rear seat cushion assembly.