Installation

2AZ-FXE ENGINE MECHANICAL: ENGINE FRONT OIL SEAL: INSTALLATION

INSTALLATION

1. INSTALL TIMING CHAIN CASE OIL SEAL
(a) Apply MP grease to a new oil seal lip.
NOTICE: Keep the lip free from foreign matter.





(b) Using SST and a hammer, tap in the oil seal until its surface is flush with the front oil seal retainer edge.
SST: 09223-22010
NOTICE: Wipe off extra grease from the crankshaft.

2. INSTALL CRANKSHAFT PULLEY
(a) Align the pulley set key with the key groove of the pulley.





(b) Using SST, hold the pulley in place and tighten the bolt.
SST: 09213-54015
91651-60855
SST: 09330-00021
Torque: 180 Nm (1,835 kgf-cm, 133ft-lbf)
3. INSTALL V-RIBBED BELT Installation
4. INSTALL V-RIBBED BELT TENSIONER COVER SUB-ASSEMBLY Installation
5. INSTALL ENGINE UNDER COVER LH
6. INSTALL ENGINE UNDER COVER RH
7. INSTALL FRONT FENDER APRON SEAL RH
8. INSTALL FRONT WHEEL RH
9. CHECK FOR ENGINE OIL LEAKS