Removal

2AZ-FXE ENGINE MECHANICAL: ENGINE FRONT OIL SEAL: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL RH
2. REMOVE FRONT FENDER APRON SEAL RH
3. REMOVE ENGINE UNDER COVER LH
4. REMOVE ENGINE UNDER COVER RH
5. REMOVE V-RIBBED BELT TENSIONER COVER SUB-ASSEMBLY Removal
6. REMOVE V-RIBBED BELT Removal
7. REMOVE CRANKSHAFT PULLEY





(a) Using SST, fix the pulley in place and loosen the pulley bolt.
SST: 09213-54015
91651-60855
SST: 09330-00021





(b) Using SST, remove the pulley bolt and pulley.
SST: 09950-50013
09951-05010
09952-05010
09953-05020
09954-05021
SST: 09950-40011
09957-04010
HINT: If necessary, remove the pulley and pulley bolt using SST.

8. REMOVE TIMING CHAIN CASE OIL SEAL





(a) Using a knife, cut off the oil seal lip.
(b) Using a screwdriver with the tip taped, pry out the oil seal.
NOTICE: After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.