Removal

HYBRID BATTERY CONTROL: BATTERY BLOWER: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
2. REMOVE SPARE WHEEL COVER CLAMP
3. REMOVE SPARE WHEEL COVER ASSEMBLY
4. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Removal
5. REMOVE REAR FLOOR FINISH PLATE Removal
6. REMOVE LUGGAGE COMPARTMENT REAR TRIM COVER Removal
7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH Removal
8. REMOVE REAR SEAT HEADREST ASSEMBLY
9. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
10. REMOVE REAR SEAT CUSHION ASSEMBLY Removal
11. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY RH Removal
12. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY LH Removal
13. REMOVE REAR SIDE SEATBACK ASSEMBLY LH Removal
14. REMOVE REAR SIDE SEATBACK ASSEMBLY RH Removal
15. REMOVE REAR DOOR SCUFF PLATE LH Removal
16. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
17. REMOVE REAR DOOR SCUFF PLATE RH Removal
18. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
19. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH Removal
20. REMOVE ROOF SIDE INNER GARNISH LH Removal
21. REMOVE ROOF SIDE INNER GARNISH RH Removal
22. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for LH Side) Removal
23. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side) Removal
24. REMOVE REAR SEAT SHOULDER BELT COVER Removal
25. REMOVE REAR SEAT SHOULDER BELT HOLE COVER Removal
26. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY Removal
27. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER Removal
28. REMOVE ROOM PARTITION BOARD LH





(a) Remove the 4 clips and room partition board LH.
29. REMOVE ROOM PARTITION BOARD RH





(a) Remove the 4 clips and room partition board RH.
30. REMOVE NO. 1 HV BATTERY INTAKE DUCT





(a) Remove the No. 1 HV battery intake duct.
31. REMOVE NO. 2 HV BATTERY INTAKE DUCT





(a) Remove the 2 bolts, clip, and No. 2 HV battery intake duct.
32. REMOVE BATTERY COOLING BLOWER ASSEMBLY





(a) Remove the bolt from the battery cooling blower assembly.
(b) Disconnect the connector from the battery cooling blower assembly.





(c) Remove the battery cooling blower assembly shown in the illustration.
NOTICE :
- Do not touch the fan of the battery cooling blower assembly.
- Do not hold the wire harness when lifting the battery cooling blower assembly.