Initialization

METER: METER / GAUGE SYSTEM: INITIALIZATION

INITIALIZATION

1. OIL MAINTENANCE INFORMATION MODE RESET OPERATION
HINT:
- The trip meter reset knob is located on the right side of the combination meter assembly.
- This reset operation is required only for U.S.A.

(a) Turn the power switch on (IG).
(b) Press the ODO/TRIP switch until the trip meter A appears.
(c) Turn the power switch off.
(d) Turn the power switch on (IG) while pressing and holding the trip meter reset knob. Hold the trip meter reset knob until the following conditions are met and 5 seconds have passed.




- The multi-information display shows "MAINT REQD RESET MODE".
- The master caution indicator light illuminates.
- When the oil replacement reminder light turns off, the reset is complete.

(e) When "MAINT REQD RESET MODE COMPLETE" disappears and the master caution indicator light turns off, the reset is complete.