Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL REAR LIGHT ASSEMBLY





(a) Engage the pin and install the rear light assembly.
(b) Install the 3 nuts.
Torque: 5.4 Nm (55 kgf-cm, 48in-lbf)
2. INSTALL LUGGAGE COMPARTMENT DOOR COVER
3. INSTALL REAR COMBINATION LIGHT ASSEMBLY





(a) Engage the clip and install the rear combination light assembly.
(b) Install the 3 nuts.
Torque: 5.4 Nm (55 kgf-cm, 48in-lbf)





(c) Connect the connector and clamp.
4. INSTALL REAR FLOOR FINISH PLATE Installation
5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Installation
6. INSTALL SPARE WHEEL COVER ASSEMBLY
7. INSTALL SPARE WHEEL COVER CLAMP
8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
9. INSTALL REAR BUMPER ASSEMBLY Installation