Vehicle Stability Control System (for BOSCH Made)
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM (for BOSCH Made): DIAGNOSTIC TROUBLE CODE CHART
DIAGNOSTIC TROUBLE CODE CHART
- If a trouble code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, refer to the respective "DTC Code" in the DTC chart.
- Inspect the fuse and relay before investigating the trouble areas as shown in the table below.
DTC chart of ABS:
C0200/31 - C0273/13:
C0278/11 - C1246/46:
C1249/49 - C1331/36:
C1332/38 - C1333/39 / U0073/94:
(*1, *2):
Even after the trouble areas are repaired, the ABS warning light will not go off unless the following operations are performed:
- (*1):
1. Drive the vehicle at 12 mph (20 km/h) for 30 seconds or more and check that the ABS warning light goes off.
2. Clear the DTC.
- (*2):
1. Keep the vehicle stationary for 5 seconds or more and depress the brake pedal lightly 2 or 3 times.
2. Drive the vehicle at the vehicle speed of 31 mph (50 km/h) and keep depressing the brake pedal strongly for approximately 3 seconds.
3. Repeat the above operation 3 times or more and check that the ABS warning light goes off.
4. Clear the DTC.
HINT: In some cases, Techstream cannot be used when the ABS warning light remains on.
DTC chart of VSC:
