Reassembly

PARKING BRAKE: PARKING BRAKE LEVER: REASSEMBLY

REASSEMBLY

1. INSTALL PARKING BRAKE SWITCH ASSEMBLY





(a) Install the parking brake switch assembly with the screw.
2. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.





(b) Temporarily tighten the lock nut and the No. 1 wire adjusting nut.
NOTICE: Fully tighten the lock nut when adjusting the parking brake lever travel.

Torque: 5.0 Nm (51 kgf-cm, 44in-lbf)





(c) Bend the parking brake lever claw.