Removal

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY (for Power Seat): REMOVAL

REMOVAL

Service Precautions
1. REMOVE FRONT SEAT HEADREST ASSEMBLY
2. REMOVE SEAT TRACK COVER Removal
3. REMOVE INNER SEAT TRACK BRACKET COVER Removal
4. REMOVE FRONT SEAT ASSEMBLY Removal
5. REMOVE RECLINING POWER SEAT SWITCH KNOB Disassembly
6. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Disassembly
7. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY Disassembly
8. REMOVE FRONT SEAT INNER BELT ASSEMBLY Removal
9. REMOVE FRONT INNER SEAT CUSHION SHIELD Disassembly
10. REMOVE FRONT SEAT BACK BOARD SUB-ASSEMBLY Disassembly
11. REMOVE FRONT SEAT HEADREST SUPPORT (for LH Side) Disassembly
12. REMOVE FRONT SEAT HEADREST SUPPORT (for RH Side)
HINT: Use the same procedure for the RH side and the LH side.

13. REMOVE FRONT SEPARATE TYPE SEAT BACK ASSEMBLY Disassembly
14. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY (for TMMK Made)





(a) Disconnect the 4 wire harness clamps from under the seat.





(b) Disconnect the 2 clamps.
(c) Remove the 2 nuts and the front seat side airbag assembly.
CAUTION:
- The nuts must not be reused.
- Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.