Removal

DRIVE SHAFT: FRONT DRIVE SHAFT (for TMMK Made): REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. DRAIN AUTOMATIC TRANSAXLE FLUID (for Automatic Transaxle)
(a) for 2GR-FE: Removal
(b) for 2AZ-FE:
2. DRAIN MANUAL TRANSAXLE OIL (for Manual Transaxle)
3. REMOVE FRONT WHEEL
4. REMOVE FRONT AXLE HUB NUT Removal
5. SEPARATE FRONT STABILIZER LINK ASSEMBLY Removal
6. SEPARATE FRONT SPEED SENSOR Removal
7. SEPARATE TIE ROD END SUB-ASSEMBLY Removal
8. SEPARATE FRONT SUSPENSION LOWER NO. 1 ARM Removal
9. SEPARATE FRONT AXLE ASSEMBLY Removal
10. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH Removal
11. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH Removal
12. SECURE FRONT AXLE HUB SUB-ASSEMBLY Removal
13. INSPECT FRONT DRIVE SHAFT ASSEMBLY Front Drive Shaft (for TMMK Made)